Original file (2,048 × 1,536 pixels, file size: 996 KB, MIME type: image/jpeg)
Drill guide 5
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 12:09, 22 January 2021 | | 2,048 × 1,536 (996 KB) | Tim (talk | contribs) |
You cannot overwrite this file.
The following page uses this file:
This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.
If the file has been modified from its original state, some details may not fully reflect the modified file.
| Image title |
|
|---|---|
| Camera manufacturer | Canon |
| Camera model | Canon PowerShot SD400 |
| Exposure time | 1/640 sec (0.0015625) |
| F Number | f/2.8 |
| Date and time of data generation | 12:48, 2 February 2009 |
| Lens focal length | 5.8 mm |
| User comments |
|
| Short title |
|
| JPEG file comment | These two pieces clamp to the drill press table and help make accurate drilling possible |
| Orientation | Normal |
| Horizontal resolution | 180 dpi |
| Vertical resolution | 180 dpi |
| Software used | Shotwell 0.10.1 |
| File change date and time | 12:48, 2 February 2009 |
| Y and C positioning | Centered |
| Exif version | 2.2 |
| Date and time of digitizing | 12:48, 2 February 2009 |
| Meaning of each component |
|
| Image compression mode | 5 |
| APEX shutter speed | 9.3125 |
| APEX aperture | 2.96875 |
| APEX exposure bias | 0 |
| Maximum land aperture | 2.96875 APEX (f/2.8) |
| Metering mode | Pattern |
| Flash | Flash did not fire, auto mode |
| Date metadata was last modified | 12:48, 2 February 2009 |
| Keywords | Gridbeam |
