Solar panels
Parts: | Solar cells, Solder, Silicone resins, Frames, Bolts, Nuts, Sheets, Wires, Electrical connectors |
---|
Introduction
Many Replimat projects require power in some form. Photovoltaic panels provide a rugged, durable, mass produced, and inexpensive platform for the system's energy production needs.
Challenges
Similar to battery packs, balancing solar cells helps to ensure maximum power production and longevity. Sealing cells against the weather and oxidization are challenges. As is encasing the cells in a durable medium which is transparent to the light wavelengths converted to electricity by the cells. Adapting frames to fit standard sizes of pre-manufactured panels in a variety of configurations is ongoing.
Approaches
The most typical size used for residential installations is 65 inches by 39 inches, while the common size for commercial applications is 77 inches by 39 inches. The smaller size is a better fit for residential projects to maximize available roof space. Most commercial projects have hundreds of panels and this is why the slightly larger panel is a more ideal choice. SunPower is the exception to length and width. Their residential panel is 61 inches by 41 inches, slightly shorter and a little wider than standard panels.
Image | Number of cells | Width | Height |
---|---|---|---|
60 | 990mm / 39 inches | 1651mm / 65 inches | |
72 | 990mm / 39 inches | 1955mm / 77 inches | |
Sunpower | 41 inches | 61 inches |
Individual solar cells typically measure 125mm square and produce approximately 0.5v @ 3W each.
Development targets
Use hoses, File:Titebond II msds.pdf, and couplers to create a liquid cooling loop on rear side of panel.
References