Cargo cycles: Difference between revisions

From
No edit summary
Line 45: Line 45:
Adapter-bicycle-bottom-bracket-printl.jpg|Bicycle bottom bracket adapter left side
Adapter-bicycle-bottom-bracket-printl.jpg|Bicycle bottom bracket adapter left side
Adapter-bicycle-bottom-bracket-printr.jpg|Bicycle bottom bracket adapter right side
Adapter-bicycle-bottom-bracket-printr.jpg|Bicycle bottom bracket adapter right side
Cranks installed.jpg|Cranks installed
</gallery>
</gallery>


=== Safety ===
=== Safety ===

Revision as of 05:11, 27 April 2020

Parts

Quantity Part Link
1 Batteries
2 Motors
1 68mmx113mm bottom bracket - remove and store or recycle nut Amazon
1 3d printed bottom bracket holder CAD
2 Bottom bracket mounting plates - to achieve 68mm width for mounting a sealed bottom bracket, on either side of a 1 1/2 inch (38.1mm) replimat frame, ~15mm thick plate must be used for the bracket on either side. This might work with PET.
4 100 Watt flexible solar panels Amazon
1 crank arm set
1 cranks
1 freewheel to axle adapter
1 keyed axle
1 keyed sprocket
1 pillow block bearings
1 wheel spindle w/ bearings, castle nut, grease cap, cotter pin
1 saddle back / seat
1 http://www.sturmey-archer.com/en/products/detail/xl-sdd


Bottom bracket

  • Bicycle bottom bracket adapter CAD

    Bicycle bottom bracket adapter CAD

  • Bicycle bottom bracket adapter left side

    Bicycle bottom bracket adapter left side

  • Bicycle bottom bracket adapter right side

    Bicycle bottom bracket adapter right side

  • Cranks installed

    Cranks installed

Safety

  • Always-on lights wired into main battery (never forget to charge or turn on)

Research

Retrieved from "https://wiki.replimat.org/index.php?title=Cargo_cycles&oldid=947"