Cargo cycles: Difference between revisions

Revision as of 05:27, 25 April 2020

k| 1 || eyed axle || | k| 1 || eyed sprocket || |

Quantity	Part	Link
1	Batteries
2	Motors
1	68mmx113mm bottom bracket - remove and store or recycle nut	Amazon
1	3d printed bottom bracket holder	CAD
2	Bottom bracket mounting plates - to achieve 68mm width for mounting a sealed bottom bracket, on either side of a 1 1/2 inch (38.1mm) replimat frame, ~15mm thick plate must be used for the bracket on either side. This might work with PET.
4	100 Watt flexible solar panels	Amazon
1	crank arm set
1	cranks
1	freewheel to axle adapter
1	pillow block bearings
1	wheel spindle w/ bearings, castle nut, grease cap, cotter pin
1	saddle back / seat
1	http://www.sturmey-archer.com/en/products/detail/xl-sdd

@@ Line 4: / Line 4: @@
 === Parts ===
-* crank arm set
-* cranks
-* freewheel to axle adapter
-* keyed axle
-* keyed sprocket
-* pillow block bearings
-* wheel spindle w/ bearings, castle nut, grease cap, cotter pin
-* saddle back / seat
-* http://www.sturmey-archer.com/en/products/detail/xl-sdd
-* https://www.amazon.com/SHIMANO-Square-Taper-Bottom-Bracket/dp/B005LT5HDU?th=1&psc=1
 {| class="wikitable"
 |-
@@ Line 29: / Line 19: @@
 |-
 | 4 || 100 Watt flexible solar panels || [https://www.amazon.com/DOKIO-Semi-Flexible-Monocrystalline-Lightweight-Irregular/dp/B07VM6G4V9/ref=sr_1_8?dchild=1&keywords=flexible+solar+panels&qid=1585861757&sr=8-8 Amazon]
+|-
+| 1 || crank arm set || |
+|-
+| 1 || cranks || |
+|-
+| 1 || freewheel to axle adapter || |
+|-
+k| 1 || eyed axle || |
+|-
+k| 1 || eyed sprocket || |
+|-
+| 1 || pillow block bearings || |
+|-
+| 1 || wheel spindle w/ bearings, castle nut, grease cap, cotter pin || |
+|-
+| 1 || saddle back / seat || |
+|-
+| 1 || http://www.sturmey-archer.com/en/products/detail/xl-sdd || |
 |}