wanhao_duplicator_i3_3d_printer
R1 maintains four Wanhao Duplicator i3 3D printers for production FDM fabrication. Each printer has been upgraded with a controller and installed on a printer cart
ReDuplicator Upgrade
- https://github.com/OmNomNomagon/ReDuplicator-MK3x
{| class=“wikitable”
! Part !! Description !! Quantity
Stepper adapter x4 | 4 wire JST-XH male ↔ 2x male JST-XH adapter | ||
Jumper wire | 40 wires each m/m, m/f, f/f | ||
3030 Extrusion 355mm | Z Axis HFSLB6-3030-355 | ||
3030 Extrusion 350mm | Y Axis HFSLB6-3030-350 | ||
3030 Extrusion 380mm | X Axis Tower HFSLB6-3030-380 | ||
3030 Extrusion 258mm | X Axis Base HFSLB6-3030-258 | ||
30x30x35 Corner Brackets | Tabbed on SINGLE Side only HBLFSNB6 | ||
Alluminium Flat bracket | 4 mount holes HPTLS6 | ||
LM8UU Bearings | Std 8mm 15mm long bearings LMU8 | ||
M5 12mm | Button Head Screw M5 | ||
M5 16mm | Button Head Screw M5 | ||
M5 T-Nuts | 3030 T-Nuts - PACK-HNTAJ6-5 | ||
M5 20-25mm | Low Profile Button head (less than 4.2mm) | ||
M5 30-35mm | Screw M5 | ||
M3 Heatserts Amazon | Brass heat inserts M3 thread M3-UHBRHESF | ||
M3 4-8mm | Button Head Screw M3 | ||
M3 12mm | Button Head Screw M3 | ||
M3 16mm | Button Head Screw M3 | ||
M3 30mm | Screw M3 | ||
M3 6-8mm | Countersunk M3 | ||
M3 6-12mm | Countersunk M3 | ||
M5 Nylock | Nuts for Idlers | ||
M3 Nylock | Nut for part cooling and heat sert substitute | ||
M5 Smooth Idler Pulley | (Optional) 9mm wide replacement | ||
M5 Fibrous Washers | For idler Pulleys | ||
GT2 Belt | 6mm belt | ||
50mm Blower | Part Cooling | ||
M3n Square nut | X motor tensioner (optional) | ||
Printable parts
Kits
- https://github.com/PrusaMK2Users/3030_Haribo_Edition/tree/master/STL
- https://www.thingiverse.com/thing:891409
Power supply
End caps
- https://www.thingiverse.com/thing:43756
Cable organizer
Raspberry pi case
Raspberry pi camera
MKS Base electronics
Corner bracket
Spool holder
Handle
wanhao_duplicator_i3_3d_printer.txt · Last modified: 2024/10/30 02:57 by 127.0.0.1