User Tools

Site Tools


geodesic_domes

image = Plate-griddome.png |designers = [[User:Tim|Timothy Schmidt]] |date = 2012 |vitamins ====== |materials ====== |transformations ====== |lifecycles ====== |tools = [[Wrenches]] |parts = [[Plates]], [[Frames]], [[Nuts]], [[Bolts]], [[End caps]] |techniques = [[Bolting]] |files ====== |suppliers ====== |git ======

Projects Shelters

Introduction

A geodesic dome is a hemispherical thin-shell structure based on a geodesic polyhedron. The triangular elements of the dome are structurally rigid and distribute the structural stress throughout the structure, making geodesic domes able to withstand very heavy loads for their size. Its “omnitriangulated” surface provides an inherently stable structure, and a sphere encloses the greatest volume for the least surface area.

Challenges

Creating joints at angles other than 90 degrees can pose a significant challenge.

Approaches

Geodesic dome brackets were designed, cut, and bent into shape upon installation. Frames were cut such that an 8ft 2×2 could be cut once to produce both lengths needed. <gallery> Plate-griddome.png|Geodesic dome plate Griddome1-2.jpg|Grid dome Maker Faire Detroit 2012 Griddome.jpg|Grid dome Maker Faire Detroit 2012 Dome_joint_v1.jpg|Improvised dome joint Griddome-MFSF.jpg|Griddome Maker Faire San Francisco 2013 2vdiagram.gif|2v dome construction diagram from desertdomes </gallery>

References

geodesic_domes.txt · Last modified: 2024/10/30 02:57 by 127.0.0.1