User Tools

Site Tools


caster_joints

image = Caster-joint.scad.png |designers = [[User:Tim|Timothy Schmidt]] |date = 2013 |vitamins = |materials = |transformations = |lifecycles = |parts = [[Frames]], [[Bolts]], [[Nuts]], [[End caps]], [[Casters]] |techniques = [[Bolting]], [[Tri joints]], [[Shelf joints]] |tools = [[Wrenches]] |git = |files = |suppliers = |reversible = true

Techniques

=Introduction= Casters are one of the most widely used parts and come in many shapes and sizes, often with a 4-hole mounting plate.

=Challenges= Mounting the caster securely through all four mounting holes near a tri-joint (which tend to be at the corners of projects, exactly where casters want to be) isn't easily accomplished.

=Approaches= <gallery> Caster-joint.scad.png|Stronger caster joints Caster-joint-suboptimal.scad.png|Weaker caster joints </gallery> One corner configuration secures the caster at two points and centers the vertical frame member on the caster. The other applies significant force, with the possibility of a bending moment on the caster mounting plate.

=References=

caster_joints.txt · Last modified: 2024/11/05 01:48 by 127.0.0.1