Heat exchangers

From
Revision as of 08:32, 23 September 2021 by Tim (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Part: Heat exchangers

Introduction

A heat exchanger is a system used to transfer heat between two or more fluids. Heat exchangers are used in both cooling and heating processes. The fluids may be separated by a solid wall to prevent mixing or they may be in direct contact. They are widely used in space heating, refrigeration, air conditioning, power stations, chemical plants, petrochemical plants, petroleum refineries, natural-gas processing, and sewage treatment. The classic example of a heat exchanger is found in an internal combustion engine in which a circulating fluid known as engine coolant flows through radiator coils and air flows past the coils, which cools the coolant and heats the incoming air. Another example is the heat sink, which is a passive heat exchanger that transfers the heat generated by an electronic or a mechanical device to a fluid medium, often air or a liquid coolant.

Challenges

[Re]move heat from one area, to another. Often using pumps and fluids, fans and air, or a combination.

Approaches

Use TEC1-120706 thermoelectric devices, thermal epoxy, and GPU water blocks in conjunction with small sections of hose, clamps, and quick connect fittings, to adapt away from the barb connections, plus the WAGO quick connect electrical connectors, to create an easy connect/disconnect heat exchanger.

Tools

Parts

Quantity Part Link
2 Fluid pumps
8 Couplers
2 Electrical connectors
2 TEC1-12706 Peltier
2 GPU water cooling block
1 Thermal epoxy

Development targets

References