Caster joints: Difference between revisions
From
No edit summary |
No edit summary |
||
Line 6: | Line 6: | ||
|techniques = [[Bolting]], [[Tri joints]], [[Shelf joints]] | |techniques = [[Bolting]], [[Tri joints]], [[Shelf joints]] | ||
|tools = [[Wrenches]] | |tools = [[Wrenches]] | ||
|git = | |||
|stl = | |||
}} | }} | ||
Revision as of 13:21, 19 April 2021
Technique: Caster joints
Tools: | Wrenches |
---|---|
Parts: | Frames, Bolts, Nuts, End caps, Casters |
Techniques: | Bolting, Tri joints, Shelf joints |
Introduction
Casters are one of the most widely used parts and come in many shapes and sizes, often with a 4-hole mounting plate.
Challenges
Mounting the caster securely through all four mounting holes near a tri-joint (which tend to be at the corners of projects, exactly where casters want to be) isn't easily accomplished.
Approaches
-
Stronger caster joints
-
Weaker caster joints
One corner configuration secures the caster at two points and centers the vertical frame member on the caster. The other applies significant force, with the possibility of a bending moment on the caster mounting plate.