Table of Contents

batteries

Parts infobox
Image
designers Timothy Schmidt
date 2018
vitamins
materials
transformations
lifecycles
parts Frames, Nuts, Bolts, End caps, Controllers, Wires, Ferrules, Electrical connectors
techniques
tools Wrenches, Soldering irons, Crimpers
files
git
suppliers

Category:Parts

Category:Electric parts

Introduction

Challenges

Solar PV panels are inexpensive and durable. As are the power conditioning electronics. Batteries, however, are expensive, prone to failure, and often discarded as trash. Can we reduce trash output while solving our expensive battery problem?

Chemistries:

Approaches

Recycle batteries from the trash stream to build new, high capacity, long lasting battery packs.

batteryv2-1.jpg

Battery (Recycled 18650 lipo cells)

Rationale:

Single battery system from tools → teslas. I'll be bringing these tools in with me, to work with:

And here's what I've purchased to build my battery - note they're all available with prime shipping, except for the BMS, which probably won't arrive in time for the first build day. The battery I'm building is 48v, or 13S (13 cells in Series). For other voltages, you might find a BMS available with faster shipping.

Tools

Parts

Development targets

Battery charging for the universal controller

Brass / Steel Battery - ​ http://pubs.acs.org/doi/ipdf/10.1021/acsenergylett.6b00295

Printed 18650 battery container block - spring-loaded (printed springs?) contacts +

locking door. Serviceable fuses and diodes

Development History

v0

Battery v0

Battery v0

Soldered 18650s, 1s120p configuration @ The Fledge

v1

Battery management system

Battery assembly

Battery v1

Battery v1

Soldered 18650s, 7s20p configuration w/ 20A BMS.

v2

Battery v2 Assembly

Battery v2

Battery v2

Based on 18650 NESE Modules. 7s7p configuration w/ 20A BMS x2, MPPT-7201A solar charge controller and DC-DC buck-boost converter, 500W motor controller, modular frame + quick disconnect pins.

v3

Purpose modeled replimat printed part w/ printed springs, zinc plated steel 5×1 plates as electrodes, lock-nutted electrode studs, USB power, 20p5s.

Off the shelf

Cell testing

References

Watch video on YouTube


Original archived page — revision 13757, 2024-08-13T16:31:59+00:00, by Tim.