====== wanhao duplicator i3 3d printer ======

^ Projects infobox ^^
| Image | {{:archive:first_production_printer_rack.jpg?240}} |
| designers |  |
| date | 2019 |
| vitamins |  |
| materials |  |
| transformations |  |
| lifecycles |  |
| tools | [[:wrenches|Wrenches]] |
| parts | [[:frames|Frames]], [[:nuts|Nuts]], [[:bolts|Bolts]], [[:end_caps|End caps]], [[:plates|Plates]] |
| techniques | [[:tri_joints|Tri joints]], [[:shelf_joints|Shelf joints]] |
| git |  |
| files |  |
| suppliers |  |

{{:archive:3d_printers.jpg?600}}

[R1] maintains four Wanhao Duplicator i3 3D printers for production FDM fabrication.  Each printer has been upgraded with a [[:controller|controller]] and installed on a [[:printer_cart|printer cart]]

=== ReDuplicator Upgrade ===

  * https://www.thingiverse.com/thing:2686588
  * https://github.com/OmNomNomagon/ReDuplicator-MK3x

^ Part ^ Description ^ Quantity ^
| [[https://www.amazon.com/MakerHawk-Printer-Parallel-Stepping-Accessories/dp/B07MFDT14K/|Stepper adapter x4]] | 4 wire [[https://en.wikipedia.org/wiki/JST_connector|JST-XH]] male <-> 2x male JST-XH adapter | 4 |
| [[https://www.amazon.com/EDGELEC-Breadboard-Optional-Assorted-Multicolored/dp/B07GD2BWPY/|Jumper wire]] | 40 wires each m/m, m/f, f/f | 10 |
| 3030 Extrusion 355mm | Z Axis HFSLB6-3030-355 | 2 |
| 3030 Extrusion 350mm | Y Axis HFSLB6-3030-350 | 2 |
| 3030 Extrusion 380mm | X Axis Tower HFSLB6-3030-380 | 2 |
| 3030 Extrusion 258mm | X Axis Base HFSLB6-3030-258 | 2 |
| 30x30x35 Corner Brackets | Tabbed on SINGLE Side only HBLFSNB6 | 14 |
| Alluminium Flat bracket | 4 mount holes HPTLS6 | 8 |
| LM8UU Bearings | Std 8mm 15mm long bearings LMU8 | 4 |
| M5 12mm | Button Head Screw M5 | 70 |
| M5 16mm | Button Head Screw M5 | 10 |
| M5 T-Nuts | 3030 T-Nuts - PACK-HNTAJ6-5 | 80 |
| M5 20-25mm | Low Profile Button head (less than 4.2mm) | 1 |
| M5 30-35mm | Screw M5 | 1 |
| M3 Heatserts [[https://www.amazon.com/uxcell-Knurled-Threaded-Insert-Embedment/dp/B07LBQRYR3/|Amazon]] | Brass heat inserts M3 thread M3-UHBRHESF | 22 |
| M3 4-8mm | Button Head Screw M3 | 8 |
| M3 12mm | Button Head Screw M3 | 6 |
| M3 16mm | Button Head Screw M3 | 6 |
| M3 30mm | Screw M3 | 3 |
| M3 6-8mm | Countersunk M3 | 4 |
| M3 6-12mm | Countersunk M3 | 8 |
| M5 Nylock | Nuts for Idlers | 2 |
| M3 Nylock | Nut for part cooling and heat sert substitute | 1 - 15 |
| M5 Smooth Idler Pulley | (Optional) 9mm wide replacement | 2 |
| M5 Fibrous Washers | For idler Pulleys | 3 - 10 |
| GT2 Belt | 6mm belt | 1m |
| 50mm Blower | Part Cooling | 1 |
| M3n Square nut | X motor tensioner (optional) | 2 |

=== Printable parts ===

  * {{:archive:r1-z-idler-bracket.stl?600}}
  * {{:archive:r1-z-idler-bracke-leftt.stl?600}}
  * {{:archive:r1-z-bracket.stl?600}}

== Kits ==

  * https://github.com/PrusaMK2Users/3030_Haribo_Edition/tree/master/STL
  * https://www.thingiverse.com/thing:891409
  * https://www.thingiverse.com/thing:1692666

== Power supply ==

  * https://www.thingiverse.com/thing:2585693

== End caps ==

  * https://www.thingiverse.com/thing:43756

== Cable organizer ==

  * https://www.thingiverse.com/thing:2568136
  * https://www.thingiverse.com/thing:2863975

== Raspberry pi case ==

  * https://www.thingiverse.com/thing:2843889
  * https://www.thingiverse.com/thing:2581113
  * https://www.thingiverse.com/thing:2288511
  * https://www.thingiverse.com/thing:2502900
  * https://www.thingiverse.com/thing:4255812

== Raspberry pi camera ==

  * https://www.thingiverse.com/thing:3030107
  * https://www.thingiverse.com/thing:2921463

== MKS Base electronics ==

  * https://www.thingiverse.com/thing:2440806
  * https://www.thingiverse.com/thing:2820070
  * https://www.thingiverse.com/thing:2932275
  * https://www.thingiverse.com/thing:2792072
  * https://www.thingiverse.com/thing:2802961

== Corner bracket ==

  * https://www.thingiverse.com/thing:2503636

== Spool holder ==

  * https://www.thingiverse.com/thing:2909802

== Handle ==

  * https://www.thingiverse.com/thing:3436787
  * https://www.thingiverse.com/thing:3867823

----
[[https://github.com/timschmidt/replimat/blob/e0bc0b855bb946bab00c75ca0d8b002ae0dc0172/wiki/wanhao_duplicator_i3_3d_printer.html|Original archived page]] — revision 8126, 2021-09-23T09:12:50+00:00, by Tim.