====== nuts inside frames ======

^ Techniques infobox ^^
| image |  |
| designers |  |
| date |  |
| vitamins |  |
| materials |  |
| transformations |  |
| lifecycles |  |
| tools | [[:wrenches|Wrenches]] |
| git |  |
| parts | [[:frames|Frames]], [[:nuts|Nuts]], [[:bolts|Bolts]], [[:washers|Washers]] |
| techniques | [[:stacked_washers|Stacked washers]] |
| files |  |
| suppliers |  |
| reversible | difficult |

[[:category:anti-patterns|Category:Anti-patterns]]

==== Introduction ====

Nuts can be threaded onto bolts while inside of hollow frame members if needed in some niche cases.

==== Challenges ====

Accessing nuts with wrenches after project is assembled.

==== Approaches ====

Use the next longer size [[:bolts|bolt]] and [[:stacked_washers|stacked washers]] on the reverse side to allow a [[:nuts|nut]] to tighten fully.

==== References ====

----
[[https://github.com/timschmidt/replimat/blob/e0bc0b855bb946bab00c75ca0d8b002ae0dc0172/wiki/nuts_inside_frames.html|Original archived page]] — revision 8969, 2021-10-23T04:43:55+00:00, by Tim.