Replimat Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== drafting-table-tim 20191021-183714.png ======

I designed this drafting table at Summit Station in Willits, CA. It uses no more parts than a flat desk of similar construction, but offers adjustable height and tilt, and a pen rest. It makes use of the shelf joint discovered by Joy Livingwell.

I designed this piece using Phil and RJ Jergenson's Gridbeam system, which favored frame lengths of 1ft, 2ft, 3ft, and so on. And allowed odd lengths. Consequently, the vertical beam has 32 holes.

But 32 is not a number that works within the Replimat system, where all frame lengths are multiples of 5, and odd lengths aren't allowed. So verticals are likely to end up 30s or 35s, as I adjust the design to fit the new rules.  -- [[:user:tim|User:Tim]]

----
[[https://github.com/timschmidt/replimat/blob/e0bc0b855bb946bab00c75ca0d8b002ae0dc0172/wiki/file/drafting-table-tim_20191021-183714.png.html|Original archived page]] — revision 586, 2020-03-21T02:12:13+00:00, by Tim.