{{Projects infobox |image = |designers = |date = |vitamins = |materials = |transformations = |lifecycles = |tools = [[3D printers]] |parts = [[Filters]] |techniques = |files = |suppliers = |git = }} [[Category:Projects]] [[Category:Health and safety]] =Introduction= A respirator is a device designed to protect the wearer from inhaling hazardous atmospheres, including fumes, vapours, gases and particulate matter such as dusts and airborne microorganisms. There are two main categories: the air-purifying respirator, in which respirable air is obtained by filtering a contaminated atmosphere, and the air-supplied respirator, in which an alternate supply of breathable air is delivered. Within each category, different techniques are employed to reduce or eliminate noxious airborne contaminants. Air-purifying respirators range from relatively inexpensive single-use, disposable face masks sometimes referred to as a dust mask to more robust reusable models with replaceable cartridges often called a gas mask. =Challenges= Adequate testing and certification are desirable, especially for DIY health equipment. =Approaches= Locally produced medical supplies can supplement mass produced supplies, or provide a remedy where none exists at all. Several useful objects are provided in that spirit. ======By available filter====== ======By mask type====== ======Accessories====== * [[https://www.thingiverse.com/thing:4553847|Face mask spacer]] for ease of breathing and sensory difficulties. =References= * [[https://3dprint.nih.gov/|NIH 3D Print Exchange]] * [[https://www.grainger.com/product/MILLER-ELECTRIC-LPR-100-Half-Mask-Respirator-34C395|Miller Electric LPR-100 Half Mask Respirator]] * [[https://en.wikipedia.org/wiki/Respirator|Wikipedia: Respirator]]